Fuel & Energy Fuel & Energy

STOKOTA offers tank semitrailers, trailers and superstructures in aluminium or stainless steel for the transport of both non-ADR and ADR products like fuel, heating oil, LPG and aircraft fuel.

 

While designing our tank vehicles, our target is to reach optimal efficiency and the lowest possible kerb weight in combination with the highest safety standards. The use of 3D design and Finite Elements Analysis allow us to build light constructions without losing quality or safety levels.

 

The tanks are automatic welded and accurately tested: radiographic checks on the welded joints, pressure tests, capacity measurement, safe loading tests, and brake tests.

 

After delivery you can also count on us for total service: servicing of your tank vehicle, calibration of measuring instruments, and tests of your vehicle. Our sales and engineering team always accompanies you with their professional support and advice.

 

In our offer we also have bitumen semitrailers for the transport of asphalt, crude oil or other products that must be kept hot during transportation. The semitrailers are pressure thermally insulated so that the contents of the tank will stay hot and liquid while being transported to the place of destination.

 

Another product in this group is the aircraft refueller. Whether it is a fuel truck or a fuel semitrailer you need, STOKOTA has the vehicle for you.
We also offer water tanks for the transport of drinkable water or water for irrigation.

 

We offer the following products:

 

» Fuel semitrailers

» Fuel tank trucks

» Fuel trailers

» LPG semitrailers

» LPG superstructures and trailers

» Watertanks

» Bitumen semitrailers

 




Fuel trailers


Stokota has been a European market leader in the production of fuel tank semitrailers, superstructures and trailers for many years. The advanced design and engineering has made our vehicles popular all over Europe. We build high quality tanks in aluminium or steel with a large package of standard equipment and a rich choice in options and varieties.

We can also help you in choosing the vehicle that exactly fit your needs. Our salespeople, in cooperation with our experienced engineering team, will support you in finding the best logistical solution for you.

 

FUEL TRAILERS

TECHNICAL DESCRIPTION

Capacity

From 10.000 L to 24.000 L
Aluminium coffer-shaped tank.

Construction

Light self-supporting aluminium tank.
Coffer-shaped with lowered centre of gravity.
Dish ends at the front and back.

ADR

The construction is In accordance with ADR regulations for class 3 fuel transport

Material

X-TRAL 728 aluminium according to DIN standards

Compartments

The tank is divided in 2 to 5 compartments

Welds

Supporting welds are given a radiographic check (10%).
The bottom of the tank is reinforced where it is mounted on the chassis.

Equipment of compartments

Every compartment has a manhole, manhole flange and a flange for the bottom valve

Additional equipment

- Anti-slip cover over the whole tank, or a walkway in case the tank is cylindrical;

- 2 drains at the rear of the tank that run through the inside of the tank;

- Aluminium ladder with anti-slip rungs;

- Collapsible railing on top of the tank;

- Compartments for hoses over the entire length of the tank (1 on every side)

Fittings on top of tank (for every compartment)

1 manhole cover DN 500 mm z with a DN 250 inlet, opening opposite to the driving direction

Unloading fittings

- Fittings for unloading are located in a closed aluminium cabinet with aluminium doors;

- Release pipe DN 100 leading from the bottom valve on the right side of the vehicle;

- Release valve DN 100 for gravity discharge

Unloading possibilities

Gravity discharge without measuring equipment

Chassis

- The axle supporting elements are protected against corrosion;

- BPW or SAF axles with pneumatic suspension;

- Disc brakes or drum brakes;

- Accepted load per axle: 9 ton;

- Distance between wheels - 2040 mm;

- ABS system with 4 sensors

Wheels and tyres

5 or 7 wheels and tyres (incl. spare wheel)
Tyres 385/65 R 22.5

Turn-table

Turn-table: JOST

Pneumatic air compression system

- Brake blocks and shoes asbestos free;

- Double wire braking system with automatic slack adjustment (wireless);

- The brake pressure is automatically adjusted to the load;

- Membrane braking cylinder;

- EBS system – HALDEX or WABCO, model 4S/3M

Mudguards

plastic - polyamide mudguards, equipped with splash guards on the rear axle

Additional equipment

1 bumper with built-in electric lighting in aluminium.
2 chocks (wedges) in holders.

Electrical installation

- 24V, 15-pin connection plug, in accordance with ADR regulations;

- Electrical equipment with anti-explosion safety;

- The connection cable between the tractor and the semitrailer is not included;

- Rear lighting consisting of 5 parts: braking lights, indicator lights, fog lights, reversing lights and running lights;

- Side outline with LED lights;

- License plate light;

- Reflectors on the rear of the tank;

- 2 outline lights at the end of the bumpers

Accessories

- 12 kg fire extinguisher;

- Fire extinguisher in plastic cover;

- 2 grounding bolts and 1 reel, manually operated with a grounding cable of 15 m;

- Board with product indication;

- Equipment in accordance with ADR regulations;

- Manual and scheme of unloading fittings.

Painting

Before painting, the aluminium elements are etched, then painted with a primer and then painted with a high-quality two-component acrylic paint.
Colour according to client’s wishes.

Extra

- Water tightness test of tank and fittings;

- Check of unloading fittings;

- All certificates and manual concerning bottom loading, unloading and the vapour recovery system

 

 

Back